Ceiling insulation Batts – Top Choice

From the many types of insulation materials preferred by experts and seasoned contractors is the consensus topper. However, batts are made from many types of materials and that depends on which part of the house are they used for. The most sought-after though, is the ceiling insulation batts.

It is among the favorites because aside from its being flexible, batts are the natural choice because they are also very economical and effective, compared to the other materials. They usually come in pre-cut panels because they are used to insulated areas like the floors, the walls, and the ceilings.

Experts know how to customize them to be able to fit them into difficult areas (like ceilings) without gaps. Any space or gaps will result in an ineffective insulation.

Materials  

Batts material is generally made of fiberglass or rock or slag wool. The cotton varieties are mostly used for acoustic and thermal installations. They are the more popular among others for insulation because they are economical when effectively put in place by professionals.

When installing batts, it is important that the panels are customized to perfectly fit the intended areas in your homes. If there are gaps, the cooling and heating will be ineffective shortly. The insulation batts for ceilings are one of more popular choices in insulation.

The others include the blown fiberglass sand cellulose, and those that are sprayed (also fiberglass and cellulose).

Ceiling insulation

Insulating the ceiling counts as one of the more effective energy efficiency measures. The other advantage is that they are the easiest part to insulate because of accessibility. The homes with cathedral ceiling, however, have unique insulation requirement.

During the batt insulation on the ceiling, there is need to seal off the entire attic to home air leaks, especially the chases, bypasses and fur-downs. Insulation using fiberglass and rock wool does not stop the air flow.

In attics, which can be insulated with either loose-fill or batts, there is need to put the backing next to the ceiling finish for batts with attached vapor retarders. 

Blown

Sometimes, it is a good choice if the insulation comes in smaller chunks. With a hose, installers blow the insulating chunks into the attic. The two main choices for this are fiberglass and cellulose because of their qualities.

Both materials insulate about the same level and they have their R-values at about the same range. Cellulose, however, comes from recycled newspapers.

Spray

The spray foam is also among the more popular forms of insulation. There is an open cell and the closed cell. Both have their own pros and cons and with their own set of proponents.

Spray foam has the main advantage of allowing you to move – the boundary between conditioned and unconditioned spaces. Spraying foam in the roofline can bring the ducts inside. The disadvantage with spray is its cost. Generally, it costs 3 to 4 times more than the amount you pay for cellulose or fiberglass.

Ceiling insulation batts is among the good alternatives in insulating your ceiling. After all, they are the favorite among experts who knew their qualities better than anyone else.